What setting do you put Ironite fertilizer on spreader?

Depending on your specific spreader, the Ironite spreader chart recommends a setting of 3 when using a Pennington or Scotts broadcast spreader . However, after watching the flow rate, if you notice the Ironite coming out of the spreader too slowly or too quickly, adjust the setting.

How do I know what setting to put my spreader on?

If your spreader is not listed in our guide, use this rule of thumb to determine your spreader setting: Place enough material in the hopper to cover 1,000 square feet. Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less) .

What temperature do you apply Ironite?

Mind the temperatures, and shoot for application of iron when external temperatures are between 40 and 80 degrees .

What is the best setting for a spreader?

If a hand-held spreader has 10 or more settings, put the setting a notch or two above half . For pre-emergent herbicides, put the setting on or a notch above one quarter. (If there are 20 notches, 5-6 would be the setting.) On hand-held spreaders, if there are 5 or fewer settings lower the setting to 3, or even 2.

What is the difference between ironite 1-0-0 and 1 0 1?

1-0-1 describes the NPK ratio in the produ… Unfortunately, we do not carry Ironite 1-0-1 but based on that description and Ironite 1-0-0, the difference is that the first has 1% Nitrogen and 1% Potassium . The latter only contains 1% Nitrogen aside from other beneficial microbes. Those 3 numbers, i.

What are the numbers on a spreader?

The numbers stand for an application rate . A bag of commercial fertilizer will usually have numbers for where to set either broadcast or drop spreaders to get the recommended amount of fertilizer laid down.

What is the spreader rate for 10-10-10?

DIRECTIONS FOR USE 3.6 lbs/1,000 sq. ft.

How long does it take Ironite to work?

I applied the Pennington ironite and I have noticed a difference in the color and health of my lawn within 2 weeks .

Will Ironite green up my lawn?

Ironite Lawn & Plant fertilizers combine color-enhancing iron with high-quality essential plant nutrients, so your lawn and plants turn green and grow . Non-burning, these easy-to-use fertilizers feed your lawn and plants through their leaves as well as through their roots.

Can I apply Ironite after mowing?

Per the manufacturer Ironite Plus Lawn & Garden Ready-To-Spray 7-0-1 can be applied two days after cutting the grass and you would want to wait at least two days before cutting it after an application.

Does Ironite raise or lower pH?

The pH can be lowered by applying either Ironite or sulfur (one application per year of either). Once the pH is lowered to 6.0 or below, the clover will die.

What setting do you put iron rich spreader on?

Lawns. Amount to Apply: Set spreader approximately 1/3 open (Example: settings from 0-10, set between #3 and #4, settings A-Z, set at I). For heavier applications set spreader 1/2 open (Example: settings 0-10 set at 5, settings A-Z,set at M).

Ironite Spreader Settings Guide – Settings Lab (2024)

Ironite Fertilizers contain nutrients for a healthy lawn. If you want to apply these materials perfectly, it would help if you used spreaders. Besides, you will have to adjust these spreaders before using them in your yard.

Getting the best Ironite settings for your spreader might look impossible. But with a guide, you can quickly adjust your spreader to improve its performance.

In this post, we have listed the settings required by various spreaders to apply Ironite fertilizer. As expected, these settings are gathered from reliable sources. Supposing you want to use this product, you can use our post as a guide to making things easier. Now let’s get started.

Ironite Spreader Settings for Different Spreaders

Here are some suggested settings for using the Ironite fertilizer in various brands of spreaders. But before using our guide, you can check the product label of the fertilizer for any recommended spreader settings. Normally, the brand offers to list out the best figures for spreaders on their packaging.

Ironite Spreader Settings for the Scotts AccuGreen 1000: 9
Ironite Spreader Settings for the Scotts AccuGreen 2000: 9
Ironite Spreader Settings for Scotts AccuGreen 3000: 9
Ironite Spreader Settings for Earthway Drop Spreaders: 13
Ironite Spreader Settings for Precision Red Devil Drop Spreader: 2.5
Ironite Spreader Settings for Scotts Speedy Green 1000: 11.5
Ironite Spreader Settings for Scotts Speedy Green 2000: 11.5
Ironite Spreader Settings for Scotts Speedy Green 3000: 11.5
Ironite Spreader Settings for Earthway Rotary Spreader: 22
Ironite Spreader Settings for Precision Red Devil Rotary Spreader: 13
Ironite Spreader Settings for Vigoro Rotary Spreader: 9
Ironite Spreader Settings for John Deere Broadcast Spreaders: 4.5 ( 5lbs/1000 sq ft)

Ironite Spreader Settings for the Scotts AccuGreen 1000

If you own a Scotts AccuGreen Spreader 1000, you can use it to apply some Ironite fertilizer to your field. But before you get started, set the dial to 9.

Ironite Spreader Settings for the Scotts AccuGreen 2000

For many gardeners, the Scotts AccuGreen Spreader comes as the best option for spreading various materials including fertilizers. So if you want to work with some Ironite, leave the setting on 9.

Ironite Spreader Spreader Settings for the AccuGreen 3000

Do you prefer using the AccuGreen 3000 for your spreading tasks? If yes, adjust the dial to 9 and head to your target area on your lawn. Then use the settihg to share the chemical across this space.

Ironite Spreader Settings for Earthway Drop Spreaders

You can also use the Ironite fertilizer with Drop Spreaders. But before you get started, make sure the dial stays on 13.

Ironite Spreader Settings for Precision Red Devil Drop Spreader

Instead of trying random Precision Red Devil Drop settings for a sample of Ironite, leave the settings on 2.5. As expected, this device offers the expected results on your lawn.

Ironite Spreader Settings for Scotts Speedy Green 1000

From the Scotts models, you can also use the Speedy Green 1000 to distribute some Ironite. But first, leave the dial on 11.5.

Ironite Spreader Settings for Scotts Speedy Green 2000

As you adjust the Scotts Speedy Green for the Ironite, tune it to 11.5. Then use this setting to work on the preferred spot on your lawn.

Ironite Spreader Settings for Scotts Speedy Green 3000

As with other Speedy Green models, you can use the Speedy Green 3000 to add Ironite to your yard. Before starting this task, leave the spreader on 11.5.

Ironite Spreader Settings for Earthway Rotary Spreader

Supposing you work with the Earthway Rotary Spreader, adjust the spreader to 22. Then make sure you cover the target area properly for the lawn to become healthier.

Ironite Spreader Settings for Precision Red Devil Rotary Spreader

The Precision Red Devil Rotary Spreader is enough to apply the Ironite fertilizer. Before you get started, leave the dial on 13.

Ironite Spreader Settings for Vigoro Rotary Spreader

You can also use the Vigoro Rotary Spreader to apply various chemicals including the Ironite fertilizer. As you use both items, leave the spreader on 9.

Ironite Spreader Settings for John Deere Broadcast Spreaders

The John Deere Broadcast Spreader is another great tool for spreading several materials. As you work with this tool, set its dial to 4.5 which suits a rate of 5lbs/1000 sq ft.

Can You Apply Too Much Ironite?

As you use spreaders to share the ironite, you might have made some errors with the settings and applied too much fertilizer. Now the question comes: Can you apply too much ironite on your yard?

Well, applying too much ironite might not be a great idea. After all, this substance can change the color of the grass and affect the look of your lawn. But you can avoid this scenario by adding the ideal amount of Ironite to the grass. Then water the space immediately to prevent the color change from occurring.

If you have an accidental spill of ironite, you can also end up with color changes on the grass. When you have such issues, it would help if you quickly scrape the chemical and flush the grass with enough water.

How do You Apply the Ironite?

There is nothing much to applying Ironite to the lawn. All you have to do is follow the instructions listed on the packaging. You can also reach out to the Ironite Customer Service for extra advice.

Wrap Up

You can use the Ironite fertilizer to get healthy grass on your lawn. But as you perform this task, make sure you use the best settings for your preferred spreader. If you use the settings on this article, you can expect positive results.

As you use these settings, try to avoid overdosing as this can change the look of your lawn. Supposing you have this issue, try to water the space as quickly as possible.

If you want more settings for spreading Ironite, reach out to the Ironite customer service. As expected, this platform offers some of the most trusted advisor for working with Ironite.

Danny Saunders
Danny Saunders is a tech enthusiast. He enjoys getting his hands dirty with the features and settings of tech products and pushing them to their limits just to know how to get the best from them and how well they can endure "abuse" without breaking down. He shares his findings on this blog.
View all posts
https://settingslab.com basicfreelance@gmail.com Saunders Danny